We offer sea container transport from China to all world ports, According to our customers ' needs and the specifics of the goods.
Full containers – from China to all over the world. We offer advantageous solutions for the international transportation of full containers at competitive prices, short transit times and global coverage of maritime container transport.
Groupage containers – Regular group lines from Guangzhou, China to the port of Varna.
Specification of sea containers
General information:
Standard containers are also known as multipurpose containers. They are closed containers, i.e.. they are closed on all sides. There is a difference between the different types of standard containers:
- Standard containers with doors on one or both ends.
- Standard containers with doors on one or both end and side doors over the entire length of the container from one or both sides.
- Standard containers with doors on one or both ends and doors on one or both sides.
In addition,, various types of standard containers are distinguished by size and weight, Depending on the wide range of types of standard containers.
20-foot or 40-foot – Specially designed for the carriage of standard loads. The maximum weight may vary.
40 "High Cube" the containers are similar to standard, but are higher. Unlike standard containers, the maximum height is 2591 mm (8' 6″), "High Cube" containers are high 2896 mm (9' 6″). "High Cube" containers are normally with a length 40 feet, but sometimes used and 45-foot containers.
Refrigeration containers be used for goods, which have to be transported at a constant positive or negative temperature. These goods are divided into chilled or frozen, Depending on, If the transport temperature is above or below the freezing point. These are primarily fruit, vegetables, meat and dairy products, like butter, cheese and yellow cheese. Through a specially controlled environment in the refrigeration containers does the preservation of perishable products for longer time. Requirement for refrigeration containers is to be hermetically sealed, to limit the oxidation effects of oxygen in the ambient air. The market offer refrigeration systems, that integrate into the container. In recent years, appeared and containers with completely autonomous controlling the indoor environment. System for controlling a constant environment is located inside the container. This is necessary, to change the dimensions of the container when an external paste and so to break the ISO standards. Then you could have problems occur during transport, for example, when placing the container in a standard sized box of ship. The internal placement of the system leads to a reduction of the space in the container and the payload. Refrigerated containers are typically 20-foot or 40-foot.
"Open top" – the walls of the containers in most case are made of corrugated sheet metal. The floor is wooden. For this type of container is typical following – the roof is made of removable beams, covered with tarpaulin, the console of the door can be rotated. These two structural features significantly simplifies the process of loading and unloading of containers. It's a lot easier to container loads and unloads the top or through the doors with the help of a crane or other lifting device, When the roof is down and the console on the gate is rotated. It may be noted, the aim of the demountable beams of the roof is not only to keep the tarp, but also contribute to the stability of the container. The rings of security ropes, with that securing the cargo, are located on the upper and lower side beams, and in the corner supports of the container. Through them, securing loads to 1000 kg. Usually "open top" containers are 20-foot or 40-foot.
"Flat rack" the containers are made as hardwood platform, around which there is a bearing metal frame, and two vertical walls at both ends, that are rigidly fastened. These walls are sufficiently stable, to ensure that, if necessary, the arrangement of several containers of this type, along with the load, on top of each other. Typically, flat rack containers are 20-foot or 40-foot. The rings of security ropes, with that securing the cargo, are located on the bearing side beams, in the angular bearings and on the floor of the container. Through them, securing loads to 2000 kg for 20-foot and up 4000 kg for 40-foot containers. To ensure the safe transportation of cargo, some "flat rack containers are fitted with side beams.
„Platform„ containers – These containers consist solely of floor platform, which has an extraordinary large load capacity. This allows for the transportation of very heavy loads over short distances. The containers are made as hardwood platform, around which there is a bearing metal frame. Containers, platforms are usually 20-foot or 40-foot. The rings of security ropes, with that securing the cargo, are located on the bearing side beams. Through them, securing loads to 3000 kg.
